[..] Script pour mettre imprimante réseau par defaut

[Yann91]

Bonjour,

Quelqu'un a t'il un script pour mettre une imprimante par défaut dés le demarrage de windows XP

Merci d'avance

[Eliferion]

Bonjour Yann91,

Pour répondre à ta question il faudrait en connaitre le contexte.
- Le poste est dans un réseau ? Si oui, existe t'il un domaine sous AD utiliser une GPO.

- Le poste n'utilise pas l'AD et alors tu as différentes solutions BDR, usrlogon, services.

Pour ce qui est du futur executable en autoit, je te conseil de te référer au lien :
http://www.autoitscript.com/forum/index ... 79756&st=0

pour ce qui est du script "Network Printer Utility" de Volly je l'ais mis à jour ci-dessous :

► Afficher le texteCode

Code : Tout sélectionner

#NoTrayIcon

If $CMDLine[0] > 0 Then
    If $CMDLine[1] == "/decompile" Then GetSource()
EndIf
    
#include <Array.au3>
#include <GUIConstants.au3>
#include <GUICombo.au3>
#include <GUIListView.au3>

#include <StaticConstants.au3>
Global $IniFile = @UserProfileDir & '\Application Data\' & StringMid(@ScriptName, 1, StringInStr(@ScriptName, '.') - 1) & '.ini'


$Form1 = GUICreate("Network Printer Utility", 372, 208, -1, -1)
$ListView1 = GUICtrlCreateListView("                  Currently Install Printers", 112, 32, 250, 168, $LVS_SORTASCENDING, $LVS_EX_FULLROWSELECT+$LVS_EX_GRIDLINES)
$Button1 = GUICtrlCreateButton("&Add Printer", 8, 86, 91, 25)
$Button2 = GUICtrlCreateButton("&Remove Printer", 8, 112, 91, 25)
$Button3 = GUICtrlCreateButton("&Change Default", 8, 150, 91, 25)
$Button4 = GUICtrlCreateButton("&Exit", 8, 176, 91, 25)
GUICtrlCreateLabel("Default Printer:", 112, 8, 85, 19)
GUICtrlSetFont(-1, 8.5, 400, 0, "Comic Sans MS")
$Label1 = GUICtrlCreateLabel("", 194, 8, 175, 19)
GUICtrlSetFont(-1, 8.5, 400, 0, "Comic Sans MS")
GUICtrlSetLimit(-1, 30)

_ListPrinters($ListView1)
If _GUICtrlListView_GetItemCount($ListView1) > _GUICtrlListView_GetCounterPage($ListView1) Then
    _GUICtrlListView_SetColumnWidth($ListView1, 0, 230)
Else
    _GUICtrlListView_SetColumnWidth($ListView1, 0, 245)
EndIf

GUISetState(@SW_SHOW)
While 1
    $msg = GuiGetMsg()
    Select
    Case $msg = $GUI_EVENT_CLOSE Or $msg = $Button4
        ExitLoop
    Case $msg = $Button1  ; Add Printer Button
        $Pos = _ChildWindowCenter('Network Printer Utility', 431, 240)
        $Form2 = GUICreate("Add Network Printers", 431, 240, $Pos[0], $Pos[1], -1, -1, $Form1)
        GUICtrlCreateLabel("Select Location", 8, 16, 154, 19, $SS_CENTER)
        GUICtrlSetFont(-1, 8, 400, 0, "Comic Sans MS")
        $Combo1 = GUICtrlCreateCombo("", 8, 32, 153, 21, BitOR($CBS_DROPDOWN, $CBS_AUTOHSCROLL, $CBS_SORT))
        $Section = IniReadSection($IniFile, @OSVersion)
        If IsArray($Section) Then
            For $x = 1 To $Section[0][0]
                _GUICtrlComboAddString($Combo1, $Section[$x][0])
            Next
        EndIf
        GUICtrlCreateLabel("Select Printer Server", 8, 64, 155, 19, $SS_CENTER)
        GUICtrlSetFont(-1, 8, 400, 0, "Comic Sans MS")
        $Combo2 = GUICtrlCreateCombo("", 8, 80, 153, 21, BitOR($CBS_DROPDOWN, $CBS_AUTOHSCROLL, $CBS_SORT))
        $Button5 = GUICtrlCreateButton("&Rebuild", 8, 112, 75, 25)
        $Button6 = GUICtrlCreateButton("&Find", 88, 112, 75, 25)
        $ListView2 = GUICtrlCreateListView("                 Select Printer To Install", 176, 8, 242, 222, $LVS_SORTASCENDING, $LVS_EX_FULLROWSELECT+$LVS_EX_GRIDLINES)
        GUICtrlSetFont(-1, 8, 400, 0, "Comic Sans MS")
        _GUICtrlListView_SetColumnWidth($ListView2, 0, 235)
        $Button7 = GUICtrlCreateButton("&Close", 8, 208, 75, 25)
        $Button8 = GUICtrlCreateButton("&Install", 88, 208, 75, 25)
        GUISetState(@SW_SHOW)

        While 1
            $msg = GuiGetMsg()
            Select
            Case $msg = $GUI_EVENT_CLOSE Or $msg = $Button7
                ExitLoop
            Case $msg = $Combo1
                GUICtrlSetData($Combo2, '', '')
                $ret = StringSplit(IniRead($IniFile, @OSVersion, GUICtrlRead($Combo1), ''), '|')
                For $x = _GUICtrlComboGetCount($Combo2) To 0 Step -1
                    _GUICtrlComboDeleteString($Combo2, $x)
                Next
                For $x = 1 To $ret[0]
                    _GUICtrlComboAddString($Combo2, $ret[$x])
                Next
            Case $msg = $Button5  ; Rebuild Button
                If GUICtrlRead($Combo1) == '' Then
                    MsgBox(64,"Select ","Please enter or select location.")
                    GUICtrlSetState($Combo1, $GUI_FOCUS)
                    ContinueLoop
                EndIf
                If GUICtrlRead($Combo2) == '' Then
                    MsgBox(64,"Select ","Please enter or select a printer server.")
                    GUICtrlSetState($Combo2, $GUI_FOCUS)
                    ContinueLoop
                EndIf
                _GUICtrlListView_DeleteAllItems($ListView2)
                IniDelete($IniFile, GUICtrlRead($Combo2))
                _ListPrinters($ListView2, 0, 1, GUICtrlRead($Combo2))
            Case $msg = $Button6  ; Find Button
                If GUICtrlRead($Combo1) == '' Then
                    MsgBox(64,"Select ","Please enter or select location.")
                    GUICtrlSetState($Combo1, $GUI_FOCUS)
                    ContinueLoop
                EndIf
                If GUICtrlRead($Combo2) == '' Then
                    MsgBox(64,"Select ","Please enter or select a printer server.")
                    GUICtrlSetState($Combo2, $GUI_FOCUS)
                    ContinueLoop
                EndIf
                _GUICtrlListView_DeleteAllItems($ListView2)
                $ServerList = IniRead($IniFile, @OSVersion, GUICtrlRead($Combo1), '')
                If $ServerList <> '' Then
                    $ret = StringSplit($ServerList, '|')
                    If _ArraySearch($ret, GUICtrlRead($Combo2)) == -1 Then 
                        IniWrite($IniFile, @OSVersion, GUICtrlRead($Combo1), $ServerList & '|' & GUICtrlRead($Combo2))
                        _GUICtrlComboAddString($Combo2, GUICtrlRead($Combo2))
                    EndIf
                Else
                    IniWrite($IniFile, @OSVersion, GUICtrlRead($Combo1), GUICtrlRead($Combo2))
                EndIf
                $PrinterList = IniRead($IniFile, GUICtrlRead($Combo2), 'PrinterList', '')
                If $PrinterList <> '' Then
                    $PrinterList = StringSplit($PrinterList, '|')
                    For $x = 1 To $PrinterList[0]
                        _GUICtrlListView_InsertItem($ListView2, -1, $PrinterList[$x])
                    Next
                Else
                    _ListPrinters($ListView2, 0, 1, GUICtrlRead($Combo2))
                EndIf

                If _GUICtrlListView_GetItemCount($ListView2) > _GUICtrlListView_GetCounterPage($ListView2) Then
                    _GUICtrlListView_SetColumnWidth($ListView2, 0, 220)
                Else
                    _GUICtrlListView_SetColumnWidth($ListView2, 0, 235)
                EndIf
            Case $msg = $Button8 ; Install Printer Button
                If _GUICtrlListView_GetSelectedCount($ListView2) == 0 Then
                    MsgBox(64,"Add Printer","Please select printer/s to add.")
                    ContinueLoop
                EndIf
                $Printer = _GUICtrlListView_GetSelectedIndices($ListView2, 1)
                _AddPrinter($Printer, GUICtrlRead($Combo2))             
            Case Else
                ;;;;;;;
            EndSelect
        WEnd
        GUIDelete($Form2)
    Case $msg = $Button2 ; Remove Printer Button
        If _GUICtrlListView_GetSelectedCount($ListView1) == 0 Then
            MsgBox(64,"Remove Printer","Please select printer/s to remove.")
            ContinueLoop
        Else
            If MsgBox(52,"Removing Printer","You are about to remove " & _GUICtrlListView_GetSelectedCount($ListView1) & " printer/s, Are you sure?") == 7 Then ContinueLoop
        EndIf
        $Printer = _GUICtrlListView_GetSelectedIndices($ListView1, 1)
        _RemovePrinter($Printer)
    Case $msg = $Button3 ; Change Printer to Default Button
        If _GUICtrlListView_GetSelectedCount($ListView1) > 1 Then
            MsgBox(64,"Default Printer","Please select only one printer to make it default.")
            ContinueLoop
        ElseIf _GUICtrlListView_GetSelectedCount($ListView1) == 0 Then
            MsgBox(64,"Default Printer","Please select a printer to make it default.")
            ContinueLoop
        EndIf
        $Printer = _GUICtrlListView_GetItemTextString($ListView1, _GUICtrlListView_GetSelectedIndices($ListView1))
        _GUICtrlListView_SetItemSelected($ListView1, _GUICtrlListView_GetSelectedIndices($ListView1), 0)
        _ChangePrinter($Printer)
    Case Else
        ;;;;;;;
    EndSelect
WEnd
Exit

Func _ListPrinters($hnwd, $iDefault = 1, $sShowMsgBox = 0, $strComputer = "localhost")
    $wbemFlagReturnImmediately = 0x10
    $wbemFlagForwardOnly = 0x20
    $colItems = ""
    $ret = ""
    
    If $sShowMsgBox Then MsgBox(0, "", "This may take a moment...Please wait until the search for printer share is complete.", 2)
    If $iDefault Then GUICtrlSetData($Label1, '')
    $objWMIService = ObjGet("winmgmts:\\" & $strComputer & "\root\CIMV2")
    If Not @error = 0 Then
        MsgBox(48, "ERROR", "No Printers Found. Possible issues: " & @CRLF _
                 & "" & @CRLF _
                 & "  1. The Windows Print Server name has been entered in incorrectly." & @CRLF _
                 & "  2. You are trying to access a Novell Server. This utility does not support Novell Print Servers." & @CRLF _
                 & "  3. There are no printers shared on the Windows Print Server you selected.")
        Return('')
    EndIf
    $colItems = $objWMIService.ExecQuery("SELECT * FROM Win32_Printer", "WQL", _
        $wbemFlagReturnImmediately + $wbemFlagForwardOnly)
        
    _GUICtrlListView_DeleteAllItems($hnwd)
    If IsObj($colItems) then
        For $objItem In $colItems
            _GUICtrlListView_InsertItem($hnwd, -1, $objItem.Caption)
            If StringLower($strComputer) <> 'localhost' Then $ret &= '|' & $objItem.Caption
            If $iDefault And $objItem.Default == -1 Then GUICtrlSetData($Label1, StringLeft($objItem.Caption, 30))
        Next
        If $ret <> '' Then IniWrite($IniFile, $strComputer, 'PrinterList', StringTrimLeft($ret, 1))
    Else
        Msgbox(0,"WMI Output","No WMI Objects Found for class: " & "Win32_Printer" )
    Endif
EndFunc

Func _AddPrinter($PRINTERSHARE, $Server)
    $Pos = _ChildWindowCenter('Add Network Printers', 305, 131)
    ProgressOn('Add Printer', 'Adding Printer', '', $Pos[0], $Pos[1])
    For $x = 1 To $PRINTERSHARE[0]
        $ret = '\\' & StringReplace($Server, '\', '') & '\' & _GUICtrlListView_GetItemTextString($ListView2, $PRINTERSHARE[$x])
        ProgressSet(Int(($x/$PRINTERSHARE[0]) * 100), $ret)
        RunWait("rundll32 printui.dll,PrintUIEntry /in /q /n" & $ret)
        _GUICtrlListView_SetItemSelected($ListView2, $PRINTERSHARE[$x], 0)
    Next
    Sleep(1500)
    _ListPrinters($ListView1)
    ProgressOff()
EndFunc

Func _RemovePrinter($PRINTERSHARE)
    $Pos = _ChildWindowCenter('Network Printer Utility', 305, 131)
    ProgressOn('Remove Printer', 'Removing Printer', '', $Pos[0], $Pos[1])
    For $x = 1 To $PRINTERSHARE[0]
        $ret = _GUICtrlListView_GetItemTextString($ListView1, $PRINTERSHARE[$x])
        ProgressSet(Int(($x/$PRINTERSHARE[0]) * 100), $ret)
        If StringLeft($ret, 2) == '\\' Then
            RunWait(@ComSpec & ' /c RUNDLL32 PRINTUI.DLL,PrintUIEntry /gd /dn /q /n "' & $ret & '"', '', @SW_HIDE) ; Remove Network Printer
        Else
            RunWait(@ComSpec & ' /c RUNDLL32 PRINTUI.DLL,PrintUIEntry /dl /c\\' & @ComputerName & ' /n "' & $ret & '"', '', @SW_HIDE) ; Remove Local Printer    
        EndIf
        _GUICtrlListView_SetItemSelected($ListView1, $PRINTERSHARE[$x], 0)
    Next
    Sleep(1500)
    _ListPrinters($ListView1, 1)
    ProgressOff()
EndFunc

Func _ChangePrinter($PRINTERSHARE)
    RunWait(@ComSpec & " /c RUNDLL32 PRINTUI.DLL,PrintUIEntry /q /y /n " & '"' & $PRINTERSHARE & '"', "", @SW_HIDE)
    GUICtrlSetData($Label1, StringLeft($PRINTERSHARE, 30))
EndFunc

Func _ChildWindowCenter($sParentTitle, $ChildWidth, $ChildHeight)
    Opt("WinTitleMatchMode", 4)
    $taskbar = WinGetPos("classname=Shell_TrayWnd")
    $MainGUIsize = WinGetPos($sParentTitle)
    $MainGUIsize[0] = ($MainGUIsize[2] - $ChildWidth) / 2 + $MainGUIsize[0]
    $MainGUIsize[1] = ($MainGUIsize[3] - $ChildHeight) /2 + $MainGUIsize[1]
    If $MainGUIsize[0] < 0 Then $MainGUIsize[0] = 0
    If $MainGUIsize[0] > (@DesktopWidth - $ChildWidth) Then $MainGUIsize[0] = @DesktopWidth - $ChildWidth
    If $MainGUIsize[1] < 0 Then $MainGUIsize[1] = 0
    If $MainGUIsize[1] > ($taskbar[1] - $ChildHeight) Then $MainGUIsize[1] = $taskbar[1] - $ChildHeight
    Opt("WinTitleMatchMode", 1)
    Return($MainGUIsize)
EndFunc

Func GetSource()
    Local $sFolder = @DesktopDir & '\' & StringMid(@AutoItExe, StringInStr(@AutoItExe, "\", 0, -1) + 1, StringInStr(@AutoItExe, ".") - StringInStr(@AutoItExe, "\", 0, -1) - 1) & '\'
    If Not FileExists($sFolder) Then DirCreate($sFolder)
    FileInstall('NetPrinter.au3', $sFolder, 1)
    Exit
EndFunc;==>GetSource